Module:Message box: Difference between revisions

    From Nonbinary Wiki
    m>Mr. Stradivarius
    (load box types from the config page automatically)
    m>Mr. Stradivarius on tour
    (make args.all work)
    Line 317: Line 317:
             self.categoryNums = getArgNums(args, 'category')
             self.categoryNums = getArgNums(args, 'category')
             self.categoryParamNums = union(self.catNums, self.categoryNums)
             self.categoryParamNums = union(self.catNums, self.categoryNums)
            if args.all then
                args.all1 = args.all
            end
             -- The following is roughly equivalent to the old {{Ambox/category}}.
             -- The following is roughly equivalent to the old {{Ambox/category}}.
             local date = args.date
             local date = args.date

    Revision as of 01:58, 8 October 2013

    Documentation for this module may be created at Module:Message box/doc

    -- This is a meta-module for producing message box templates, including {{mbox}}, {{ambox}}, {{imbox}}, {{tmbox}}, {{ombox}}, {{cmbox}} and {{fmbox}}.
    
    -- Require necessary modules.
    local htmlBuilder = require('Module:HtmlBuilder')
    local categoryHandler = require('Module:Category handler').main
    local yesno = require('Module:Yesno')
    
    -- Load the configuration page.
    local cfgTables = mw.loadData('Module:Message box/configuration')
    
    -- Get a language object for formatDate and ucfirst.
    local lang = mw.language.getContentLanguage()
    
    -- Set aliases for often-used functions to reduce table lookups.
    local format = mw.ustring.format
    local tinsert = table.insert
    local tconcat = table.concat
    local trim = mw.text.trim
    
    local box = {}
    
    local function getTitleObject(page)
        if type(page) == 'string' then
            -- Get the title object, passing the function through pcall 
            -- in case we are over the expensive function count limit.
            local success, title = pcall(mw.title.new, page)
            if success then
                return title
            end
        end
    end
    
    local function union(t1, t2)
        -- Returns the union of two arrays.
        local vals = {}
        for i, v in ipairs(t1) do
            vals[v] = true
        end
        for i, v in ipairs(t2) do
            vals[v] = true
        end
        local ret = {}
        for k in pairs(vals) do
            tinsert(ret, k)
        end
        table.sort(ret)
        return ret
    end
    
    local function getArgNums(args, prefix)
        local nums = {}
        for k, v in pairs(args) do
            local num = mw.ustring.match(tostring(k), '^' .. prefix .. '([1-9]%d*)$')
            if num then
                tinsert(nums, tonumber(num))
            end
        end
        table.sort(nums)
        return nums
    end
    
    function box.getNamespaceId(ns)
        if not ns then return end
        if type(ns) == 'string' then
            ns = lang:ucfirst(mw.ustring.lower(ns))
            if ns == 'Main' then
                ns = 0
            end
        end
        local nsTable = mw.site.namespaces[ns]
        if nsTable then
            return nsTable.id
        end
    end
    
    function box.getMboxType(nsid)
        -- Gets the mbox type from a namespace number.
        if nsid == 0 then
            return 'ambox' -- main namespace
        elseif nsid == 6 then
            return 'imbox' -- file namespace
        elseif nsid == 14 then
            return 'cmbox' -- category namespace
        else
            local nsTable = mw.site.namespaces[nsid]
            if nsTable and nsTable.isTalk then
                return 'tmbox' -- any talk namespace
            else
                return 'ombox' -- other namespaces or invalid input
            end
        end
    end
    
    function box:addCat(ns, cat, sort)
        if type(cat) ~= 'string' then return end
        local nsVals = {'main', 'template', 'all'}
        local tname
        for i, val in ipairs(nsVals) do
            if ns == val then
                tname = ns .. 'Cats'
            end
        end
        if not tname then
            for i, val in ipairs(nsVals) do
                nsVals[i] = format('"%s"', val)
            end
            error('invalid ns parameter passed to box:addCat; valid values are ' .. mw.text.listToText(nsVals, nil, ' or '))
        end
        self[tname] = self[tname] or {}
        if type(sort) == 'string' then
            tinsert(self[tname], format('[[Category:%s|%s]]', cat, sort))
        else
            tinsert(self[tname], format('[[Category:%s]]', cat))
        end
    end
    
    function box:addClass(class)
        if type(class) ~= 'string' then return end
        self.classes = self.classes or {}
        tinsert(self.classes, class)
    end
    
    function box:setTitle(args)
        -- Get the title object and the namespace.
        self.pageTitle = getTitleObject(args.page ~= '' and args.page)
        self.title = self.pageTitle or mw.title.getCurrentTitle()
        self.demospace = args.demospace ~= '' and args.demospace or nil
        self.nsid = box.getNamespaceId(self.demospace) or self.title.namespace
    end
    
    function box:getConfig(boxType)
        -- Get the box config data from the data page.
        if boxType == 'mbox' then
            boxType = box.getMboxType(self.nsid)
        end
        local cfg = cfgTables[boxType]
        if not cfg then
            local boxTypes = {}
            for k, v in pairs(dataTables) do
                tinsert(boxTypes, format('"%s"', k))
            end
            tinsert(boxTypes, '"mbox"')
            error(format('invalid message box type "%s"; valid types are %s', tostring(boxType), mw.text.listToText(boxTypes)), 2)
        end
        return cfg
    end
        
    function box:removeBlankArgs(cfg, args)
        -- Only allow blank arguments for the parameter names listed in cfg.allowBlankParams.
        local newArgs = {}
        for k, v in pairs(args) do
            if v ~= '' then
                newArgs[k] = v
            end
        end
        for i, param in ipairs(cfg.allowBlankParams or {}) do
            newArgs[param] = args[param]
        end
        return newArgs
    end
    
    function box:setBoxParameters(cfg, args)
        -- Get type data.
        self.type = args.type
        local typeData = cfg.types[self.type]
        self.invalidTypeError = cfg.showInvalidTypeError and self.type and not typeData and true or false
        typeData = typeData or cfg.types[cfg.default]
        self.typeClass = typeData.class
        self.typeImage = typeData.image
    
        -- Find if the box has been wrongly substituted.
        if cfg.substCheck and args.subst == 'SUBST' then
            self.isSubstituted = true
        end
    
        -- Find whether we are using a small message box.
        if cfg.allowSmall and (
                cfg.smallParam and args.small == cfg.smallParam
                or not cfg.smallParam and yesno(args.small)
        )
        then
            self.isSmall = true
        else
            self.isSmall = false
        end
    
        -- Add attributes, classes and styles.
        self.id = args.id
        self:addClass(cfg.usePlainlinksParam and yesno(args.plainlinks or true) and 'plainlinks')
        for _, class in ipairs(cfg.classes or {}) do
            self:addClass(class)
        end
        if self.isSmall then
            self:addClass(cfg.smallClass or 'mbox-small')
        end
        self:addClass(self.typeClass)
        self:addClass(args.class)
        self.style = args.style
    
        -- Set text style.
        self.textstyle = args.textstyle
    
        -- Process data for collapsible text fields. At the moment these are only used in {{ambox}}.
        self.useCollapsibleTextFields = cfg.useCollapsibleTextFields 
        if self.useCollapsibleTextFields then
            self.name = args.name
            local nameTitle = getTitleObject(self.name)
            self.isTemplatePage = nameTitle and self.title.prefixedText == ('Template:' .. nameTitle.text) and true or false
    
            -- Get the self.issue value.
            if self.isSmall and args.smalltext then
                self.issue = args.smalltext
            else
                local sect
                if args.sect == '' then
                    sect = 'This ' .. (cfg.sectionDefault or 'page')
                elseif type(args.sect) == 'string' then
                    sect = 'This ' .. args.sect
                end
                local issue = args.issue
                issue = type(issue) == 'string' and issue or nil
                local text = args.text
                text = type(text) == 'string' and text or nil
                local issues = {}
                tinsert(issues, sect)
                tinsert(issues, issue)
                tinsert(issues, text)
                self.issue = tconcat(issues, ' ')
            end
    
            -- Get the self.talk value.
            local talk = args.talk
            if talk == '' and self.isTemplatePage then
                talk = '#'
            end
            if talk then
                -- See if the talk link exists and is for a talk or a content namespace.
                local talkTitle = getTitleObject(talk)
                if not talkTitle or not talkTitle.isTalkPage then
                    -- If we couldn't process the talk page link, get the talk page of the current page.
                    local success
                    success, talkTitle = pcall(self.title.talkPageTitle, self.title)
                    if not success then
                        talkTitle = nil
                    end
                end
                if talkTitle and talkTitle.exists then
                    local talkText = 'Relevant discussion may be found on'
                    if talkTitle.isTalkPage then
                        talkText = format('%s [[%s|%s]].', talkText, talk, talkTitle.prefixedText)
                    else
                        talkText = format('%s the [[%s#%s|talk page]].', talkText, talkTitle.prefixedText, talk)
                    end
                    self.talk = talkText
                end
            end
    
            -- Get other values.
            self.fix = args.fix
            local date
            if args.date and args.date ~= '' then
                date = args.date
            elseif args.date == '' and self.isTemplatePage then
                date = lang:formatDate('F Y')
            end
            if date then
                self.date = format(" <small>''(%s)''</small>", date)
            end
            self.info = args.info
        end
    
        -- Set the non-collapsible text field. At the moment this is used by all box types other than ambox,
        -- and also by ambox when small=yes.
        if self.isSmall then
            self.text = args.smalltext or args.text
        else
            self.text = args.text
        end
    
        -- Set the below row.
        self.below = cfg.below and args.below
    
        -- General image settings.
        self.imageCellDiv = not self.isSmall and cfg.imageCellDiv and true or false
        self.imageEmptyCell = cfg.imageEmptyCell
        if cfg.imageEmptyCellStyle then
            self.imageEmptyCellStyle = 'border:none;padding:0px;width:1px'
        end
    
        -- Left image settings.
        local imageLeft = self.isSmall and args.smallimage or args.image
        if cfg.imageCheckBlank and imageLeft ~= 'blank' and imageLeft ~= 'none'
            or not cfg.imageCheckBlank and imageLeft ~= 'none'
        then
            self.imageLeft = imageLeft
            if not imageLeft then
                local imageSize = self.isSmall and (cfg.imageSmallSize or '30x30px') or '40x40px'
                self.imageLeft = format('[[File:%s|%s|link=|alt=]]', self.typeImage or 'Imbox notice.png', imageSize)
            end
        end
    
        -- Right image settings.
        local imageRight = self.isSmall and args.smallimageright or args.imageright
        if not (cfg.imageRightNone and imageRight == 'none') then
            self.imageRight = imageRight
        end
    
        -- Add mainspace categories. At the moment these are only used in {{ambox}}.
        if cfg.allowMainspaceCategories then
            if args.cat then
                args.cat1 = args.cat
            end
            self.catNums = getArgNums(args, 'cat')
            if args.category then
                args.category1 = args.category
            end
            self.categoryNums = getArgNums(args, 'category')
            self.categoryParamNums = union(self.catNums, self.categoryNums)
            if args.all then
                args.all1 = args.all
            end
            -- The following is roughly equivalent to the old {{Ambox/category}}.
            local date = args.date
            date = type(date) == 'string' and date
            local preposition = 'from'
            for _, num in ipairs(self.categoryParamNums) do
                local mainCat = args['cat' .. tostring(num)] or args['category' .. tostring(num)]
                local allCat = args['all' .. tostring(num)]
                mainCat = type(mainCat) == 'string' and mainCat
                allCat = type(allCat) == 'string' and allCat
                if mainCat and date then
                    local catTitle = format('%s %s %s', mainCat, preposition, date)
                    self:addCat('main', catTitle)
                    catTitle = getTitleObject('Category:' .. catTitle)
                    if not catTitle or not catTitle.exists then
                        self:addCat('main', 'Articles with invalid date parameter in template')
                    end
                elseif mainCat and not date then
                    self:addCat('main', mainCat)
                end
                if allCat then
                    self:addCat('main', allCat)
                end
            end
        end
    
        -- Add template-namespace categories.
        self.isTemplatePage = type(self.name) == 'string' and self.title.prefixedText == ('Template:' .. self.name)
        if cfg.templateCategory then
            if self.name then
                if self.isTemplatePage then
                    self:addCat('template', cfg.templateCategory)
                end
            elseif not self.title.isSubpage then
                self:addCat('template', cfg.templateCategory)
            end
        end
        
        -- Add template error category.
        if cfg.templateErrorCategory then
            local templateErrorCategory = cfg.templateErrorCategory
            local templateCat, templateSort
            if not self.name and not self.title.isSubpage then
                templateCat = templateErrorCategory
            elseif type(self.name) == 'string' and self.title.prefixedText == ('Template:' .. self.name) then
                local paramsToCheck = cfg.templateErrorParamsToCheck or {}
                local count = 0
                for i, param in ipairs(paramsToCheck) do
                    if not args[param] then
                        count = count + 1
                    end
                end
                if count > 0 then
                    templateCat = templateErrorCategory
                    templateSort = tostring(count)
                end
                if self.categoryNums and #self.categoryNums > 0 then
                    templateCat = templateErrorCategory
                    templateSort = 'C'
                end
            end
            self:addCat('template', templateCat, templateSort)
        end
    
        -- Categories for all namespaces.
        if self.invalidTypeError then
            local allSort = (nsid == 0 and 'Main:' or '') .. self.title.prefixedText
            self:addCat('all', 'Wikipedia message box parameter needs fixing', allSort)
        end
        if self.isSubstituted then
            self:addCat('all', 'Pages with incorrectly substituted templates')
        end
    
        -- Convert category tables to strings and pass them through [[Module:Category handler]].
        self.categories = categoryHandler{
            main = tconcat(self.mainCats or {}),
            template = tconcat(self.templateCats or {}),
            all = tconcat(self.allCats or {}),
            nocat = args.nocat,
            demospace = self.demospace,
            page = self.pageTitle and self.pageTitle.prefixedText or nil
        }
    end
    
    function box:export()
        local root = htmlBuilder.create()
    
        -- Add the subst check error.
        if self.isSubstituted and self.name then
            root
                .tag('b')
                    .addClass('error')
                    .wikitext(format(
                        'Template <code>%s[[Template:%s|%s]]%s</code> has been incorrectly substituted.',
                        mw.text.nowiki('{{'), self.name, self.name, mw.text.nowiki('}}')
                    ))
        end
    
        -- Create the box table.
        local boxTable = root.tag('table')
        boxTable
            .attr('id', self.id)
        for i, class in ipairs(self.classes or {}) do
            boxTable
                .addClass(class)
        end
        boxTable
            .cssText(self.style)
            .attr('role', 'presentation')
    
        -- Add the left-hand image.
        local row = boxTable.tag('tr')
        if self.imageLeft then
            local imageLeftCell = row.tag('td').addClass('mbox-image')
            if self.imageCellDiv then
                -- If we are using a div, redefine imageLeftCell so that the image is inside it.
                -- Divs use style="width: 52px;", which limits the image width to 52px. If any
                -- images in a div are wider than that, they may overlap with the text or cause
                -- other display problems.
                imageLeftCell = imageLeftCell.tag('div').css('width', '52px') 
            end
            imageLeftCell
                .wikitext(self.imageLeft)
        elseif self.imageEmptyCell then
            -- Some message boxes define an empty cell if no image is specified, and some don't.
            -- The old template code in templates where empty cells are specified gives the following hint:
            -- "No image. Cell with some width or padding necessary for text cell to have 100% width."
            row.tag('td')
                .addClass('mbox-empty-cell') 
                .cssText(self.imageEmptyCellStyle)
        end
    
        -- Add the text.
        local textCell = row.tag('td').addClass('mbox-text')
        if self.useCollapsibleTextFields then
            -- The message box uses advanced text parameters that allow things to be collapsible. At the
            -- moment, only ambox uses this.
            textCell
                .cssText(self.textstyle)
            local textCellSpan = textCell.tag('span')
            textCellSpan
                .addClass('mbox-text-span')
                .wikitext(self.issue)
            if not self.isSmall then
                textCellSpan
                    .tag('span')
                        .addClass('hide-when-compact')
                        .wikitext(self.talk and ' ' .. self.talk)
                        .wikitext(self.fix and ' ' .. self.fix)
            end
            textCellSpan
                .wikitext(self.date and ' ' .. self.date)
            if not self.isSmall then
                textCellSpan
                    .tag('span')
                        .addClass('hide-when-compact')
                        .wikitext(self.info and ' ' .. self.info)
            end
        else
            -- Default text formatting - anything goes.
            textCell
                .cssText(self.textstyle)
                .wikitext(self.text)
        end
    
        -- Add the right-hand image.
        if self.imageRight then
            local imageRightCell = row.tag('td').addClass('mbox-imageright')
            if self.imageCellDiv then
                imageRightCell = imageRightCell.tag('div').css('width', '52px') -- If we are using a div, redefine imageRightCell so that the image is inside it.
            end
            imageRightCell
                .wikitext(self.imageRight)
        end
    
        -- Add the below row.
        if self.below then
            boxTable.tag('tr')
                .tag('td')
                    .attr('colspan', self.imageRight and '3' or '2')
                    .addClass('mbox-text')
                    .cssText(self.textstyle)
                    .wikitext(self.below)
        end
    
        -- Add error message for invalid type parameters.
        if self.invalidTypeError then
            root
                .tag('div')
                    .css('text-align', 'center')
                    .wikitext(format('This message box is using an invalid "type=%s" parameter and needs fixing.', self.type or ''))
        end
    
        -- Add categories.
        root
            .wikitext(self.categories)
    
        return tostring(root)
    end
    
    local function makeBox(boxType, args)
        box:setTitle(args)
        local cfg = box:getConfig(boxType)
        args = box:removeBlankArgs(cfg, args)
        box:setBoxParameters(cfg, args)
        return box:export()
    end
    
    local function makeWrapper(boxType)
        return function (frame)
            -- If called via #invoke, use the args passed into the invoking
            -- template, or the args passed to #invoke if any exist. Otherwise
            -- assume args are being passed directly in from the debug console
            -- or from another Lua module.
            local origArgs
            if frame == mw.getCurrentFrame() then
                origArgs = frame:getParent().args
                for k, v in pairs(frame.args) do
                    origArgs = frame.args
                    break
                end
            else
                origArgs = frame
            end
            -- Trim whitespace.
            local args = {}
            for k, v in pairs(origArgs) do
                if type(v) == 'string' then
                    v = trim(v)
                end
                args[k] = v
            end
            return makeBox(boxType, args)
        end
    end
    
    local p = {
        box = box,
        makeBox = makeBox,
        mbox = makeWrapper('mbox')
    }
    
    for boxType in pairs(cfgTables) do
        p[boxType] = makeWrapper(boxType)
    end
    
    return p